LELY JUNO 150 - Route Management: Copy, Modify, Reset, Delete

Operating Instructions 6-9
D-I012.1109EN
innovators in agriculture
5. Push [START/STOP] to start.
Note:
The JUNO 150 approaches the charging station and stops by itself.
6.7.1.7 Waiting Time
1. Select the menu Waiting time.
2. Push [
] or [ ] to select the waiting time.
3. Push soft button [Save].
6.7.2 Copy a Route
1. Get the E-Link Manual Controller (page 6-2).
2. Push [ESC] or [
] to wake up the E-Link.
3. Stop all timed actions (page 6-13).
4. In the main menu of the E-Link, select Routes and push [ ].
5. Select Copy route and push [ ].
6. Select the route you want to copy and push [ ].
7. Push soft button [Yes] to confirm.
6.7.3 Modify a Route
1. Get the E-Link Manual Controller (page 6-2).
2. Push [ESC] or [
] to wake up the E-Link.
3. Stop all timed actions (page 6-13).
4. Test the route (page 8-3).
5. In the main menu of the E-Link, select Routes and push [ ].
6. Select Modify route and push [ ].
7. Select Modify route and push [ ].
8. Select the route you want to modify and push [ ].
9. Read the message and make sure to understand it.
10. Select the action you want to modify and push [ ].
11. If you want to add extra waiting time before the action:
1. Select the action.
2. Push soft button [New].
3. Select Waiting time and push [
].
4. Modify the waiting time with [
] or [ ].
12. If you want to modify the driving distance or the turn:
1. Select the action and push [
].