Operating Instructions 6-11
D-I012.1109EN
innovators in agriculture
3. Push [ ] or [ ] to select the route number.
4. Repeat step 6 and 7 to select the next route in the series (if
applicable).
5. Push soft button [>] twice.
6. Push [Save] to save the series of manual routes.
Delete a Manual Route
1. Push [
] or [ ] to select the route you want to delete.
2. Push soft button [Reset].
6.7.7 Define Feed Groups
1. Connect the E-Link Manual Controller.
2. Push [ESC] or [
] to wake-up the E-Link.
Note:
The E-Link Manual Controller automatically goes into sleep mode when it is
not used for 10 minutes.
3. Stop all timed actions (page 6-13).
4. In the main menu of the E-Link, select 'Routes' and push [
].
5. Select '...(voer groepen)...' and push [
].
6. Select the route and push [
].
7. Select the feed push action you want to define a feed group to.
8. Select soft button [>]. 'Default' starts to blink.
9. Use buttons [
] or [ ] to select the feed group and push soft
button [>].
Note:
Up to 20 feed groups can be used.
10. To use the full length of the push action for this feed group, push
[
].
11. To use more than one feed groups for the feed push action:
1. Push soft button [>].
2. Use button [
] and [ ] to change the length of the feed
group and push soft button [>].
3. When you push soft button [SAVE ], a new default row is
added with the remaining distance.
4. Select soft button [>]. 'Default' starts to blink.
5. Use buttons [
] or [ ] to select the feed group and push
soft button [>].
To Next Page
Loading...
