7-2 Maintenance
D-I012.1109EN
innovators in agriculture
7.3 Preparation
7.3.1 Break or close the Power Circuit
To break the power circuit
1. Loosen the knob on the battery stop (1, fig. 43, page 7-2).
To close the power circuit
1. Fasten the knob on the battery stop.
Figure 43. Break the Power Circuit
7.3.2 Remove or Install the Cover
Removal
1. Open the lid (1, fig. 44, page 7-3).
2. Loosen the two elastic fasteners (3, 4) on the inside of the cover
that attaches it to the frame.
3. Remove the cover (2).
Installation
1. Install the cover (2).
2. Install the two elastic fasteners (3, 4).
To Next Page
Loading...
