LELY JUNO 150 - Install the Battery Charger

Installation 5-7
D-I012.1109EN
innovators in agriculture
Figure 27. Install the mounting plate
5.4.4 Install the Battery Charger
Parts
• 1× Battery charger 12 V - 20 A with a power supply cable
• 1× Battery charger mounting plate
• 2× M6 bolts.
Installation
1. Install the battery charger mounting plate (1, fig. 28, page 5-8) on
the mounting plate (2).
2. Put the battery charger (3) in the tray of the battery charger
mounting plate with the indicator LEDs on the right (4).
3. Feed the 12 V cable from the battery charger through the hole on
the upper side of the electrode assembly.