LELY JUNO 150 - Install the Electrode Assembly on the Mounting Plate

Installation 5-5
D-I012.1109EN
innovators in agriculture
5.4.2 Install the Electrode Assembly on the Mounting Plate
Parts
• 1× Electrode assembly
• 2× Brackets
• 8× M8 bolts, washers and lock nuts.
Installation
1. Install the two brackets (2, fig. 26, page 5-5) on the mounting plate
(1) with four M8 bolts, washers and lock nuts (4, 5).
2. Install the electrode assembly (3) on the brackets with four M8
bolts, washers and lock nuts.
Figure 26. Install the electrode assembly