LELY JUNO 150 - Component Description; Feed Pusher Vehicle

4-2 Description and Operation
D-I012.1109EN
innovators in agriculture
4.2 Component Description
4.2.1 Feed Pusher Vehicle
The feed pusher vehicle has the following main components:
• Cover
• Skirt
• Concrete block
• Driving mechanism
• Power system, to store and distribute power
• Control system, to control the JUNO 150 using the programmed route
and sensors
• Shock system.
Figure 12. Main components JUNO 150 Feed Pusher
KEY:
1. Hinged lid - 2. Cover - 3. Charging strips - 4. Interlocking protection ring - 5. Interlocking
guard - 6. Skirt - 7. E-Link manual controller - 8. Contra weight - 9. Emergency stop button
- 10. Lid open interlock - 11. Hoisting eye - 12. Multiboard PCB-box with ON/OFF buttons