Description and Operation 4-3
D-I012.1109EN
innovators in agriculture
4.2.1.1 Covering
The JUNO 150 has:
• Cover
• Hinged lid
• Skirt.
The cover is installed on the frame with two elastic fasteners, the hinged
lid is installed on the cover. The cover has a cover switch which stops
operation immediately when the cover is removed.
The skirt is the rotating surface on the lower section of the vehicle. This
device rotates and pushes the forage against the feed fence while the
vehicle drives in a straight line along the feeding alley.
The operator opens the lid to get access to the E-Link. The technician
removes the cover to do maintenance.
4.2.1.2 Carriage and Contra Weight
The carriage has:
• Frame
• Wheel support
• Front wheel.
The front wheel is a support wheel.
The frame is attached to a concrete contra weight. The contra weight
weighs 335 kg (739 ft.) which makes sure the JUNO 150 has sufficient
mass to push the forage. On top of the concrete contra weight a
hoisting eye is installed.
To Next Page
Loading...
