Installation 5-13
D-I012.1109EN
innovators in agriculture
5.5.2 Install the Safety Bar
WARNING
Operating the JUNO 150 without safety bar is especially dangerous for
children.
1. Install the safety bar on the default safety bar position (1, fig. 33,
page 5-13) on the JUNO 150.
Figure 33. Safety bar positions
KEY:
1. Default safety bar position (right side) - 2. Optional safety bar position (left side)
5.5.3 Put the JUNO 150 in Operation
WARNING
Before you supply power to the JUNO 150 or operate, maintain or
adjust the machine, read and understand the safety instructions
carefully (page 2-2). Make sure the installation meets local
requirements.
1. Make sure the mains voltage from the power source supplies the
mains voltage required by the charging station.
2. Replace damaged wires/cables immediately.
3. Connect the charging station to an electrical socket.
4. Manually drive the JUNO 150 to the charging station (page 6-4).
5. Make sure the orange 'charge' LED is illuminated (page 4-11).
To Next Page
Loading...
