Description and Operation 4-5
D-I012.1109EN
innovators in agriculture
4.2.1.4 Power System
The power system stores and distributes the electrical power for the
driving mechanism and the control system. The power supply is a single
rechargeable 12 V gel battery. The battery has a battery stop to
interrupt the power supply.
Charging takes place at the charging station. The charging process is
controlled by the multiboard pcb.
The power system has the following primary parts:
• Battery with battery stop
• Charging strips
• Multiboard pcb.
The multiboard pcb has a ON and a OFF button to switch ON or OFF the
JUNO 150 (page 7-3, page 6-3).
Figure 14. Power system (cover and contra weight removed)
KEY:
1. Charging strip - 2. PCB-box with multiboard PCB and ON and OFF buttons - 3. Battery
stop - 4. Battery - 5. Charging strip
To Next Page
Loading...
