5-18 Installation
D-I012.1109EN
innovators in agriculture
4. Make sure the safety bar is installed on the front right side (fig. 33,
page 5-13) of the JUNO 150.
5. If the feed fence is on the right side of the JUNO 150, install the
safety bar on the front left side.
Set
1. Program the first route (for instance 1.80 m (5.9 ft) to the fence)
(page 6-5).
2. Make copies from the route for each planned route (page 6-9).
3. Modify the distances to the fence in each copied route (page 6-9).
Note:
You can also program each route separately.
Test
1. Set a series of routes in a manual route (page 6-10, page 6-14).
2. Let the JUNO 150 drive each manual route and make sure the
routes are correct.
3. If the routes are correct, set a time path (page 6-12).
Close-up
1. Make a backup (page 6-13).
Figure 36. Different routes for each distance
To Next Page
Loading...
