Lenovo System x3250 M5 - Page 209

Note:Forbrevity,inthisdocumentationtheLenovoServeRAIDSAS/SATAcontrollerisoftenreferredtoas
theSAS/SATAadapterortheServeRAIDadapter.
ToreplaceanoptionalServeRAIDSAS/SATAcontrollermemorymodule,completethefollowingsteps.
Step1.Touchthestatic-protectivepackagethatcontainsthememorycardtoanyunpaintedmetalsurface
ontheserver;then,removethememorycardfromthepackage.
Step2.AlignthememorymodulewiththeconnectorontheServeRAIDSAS/SATAcontrollerandpush
itintotheconnectoruntilitisfirmlyseated.
Figure124.ServeRAIDSAS/SATAcontrollermemorymoduleinstallation
Step3.ReinstalltheServeRAIDSAS/SATAcontroller(“ReplacinganLenovoServeRAIDSAS/SATA
controller”onpage188).
Step4.ReinstallthePCIriser-cardassembly(see“ReplacingthePCIriser-cardassembly”onpage163).
Step5.Reinstallthecover(see“Replacingthecover”onpage158).
Whattodonext
1.Installtheserverintotherackenclosureandpushtheserverintotherackuntilitclicksintoplace.
2.Reconnectthepowercordsandanycablesthatyouremoved.
3.Turnontheperipheraldevicesandtheserver.
RemovingaRAIDadapterbatteryorflashpowermodule
UsethisinformationtoremoveaRAIDadapterbatteryorflashpowermoduleintheserver.
Note:RAIDadapterbatteryorflashpowermoduleisonlysupportedinthe2.5-inchmodels.
Readthesafetyinformationin“Safety”onpagev
and“Installationguidelines”onpage31.
Ifyouarereplacingaservercomponentintheserver,youneedtoslidetheserveroutfromtherack
enclosure,turnofftheserverandperipheraldevices,anddisconnectthepowercordsandallexternalcables.
IfaRAIDadapterbatteryorflashpowermoduleisinstallednearthefancageandyouneedtoremoveit,
completethefollowingsteps:
Step1.Removethecover(see“Removingthecover”onpage157).
Chapter6.Removingandreplacingservercomponents195