SelectthischoicetovieworconfigureTrustedPlatformModule(TPM)support.
–IntegratedManagementModuleII(IMM2)
SelectthischoicetovieworchangethesettingsfortheIntegratedManagementModuleII(IMM2).
–PowerRestorePolicy
Selectthischoicetosetthemodeofoperationafterthepowerlost.
–CommandsonUSBInterface
SelectthischoicetoenableordisabletheEthernetoverUSBinterfaceonIMM2.1.Thedefault
isEnable.
–NetworkConfiguration
Selectthischoicetoviewthesystemmanagementnetworkinterfaceport,theIMM2.1MAC
address,thecurrentIMM2.1IPaddress,andhostname;definethestaticIMM2.1IPaddress,subnet
mask,andgatewayaddress,specifywhethertousethestaticIPaddressorhaveDHCPassignthe
IMM2.1IPaddress,savethenetworkchanges,andresettheIMM2.1.
–ResetIMM2.1toDefaults
SelectthischoicetovieworresetIMM2.1tothedefaultsettings.
–ResetIMM2.1
SelectthischoicetoresetIMM2.1.
–Recovery
Selectthischoicetovieworchangethesystemrecoveryparameters.
–POSTAttempts
SelectthischoicetovieworchangethenumberofattemptstoPOST.
•POSTAttemptsLimit
SelectthischoicetovieworchangetheNxbootfailureparameters.
–SystemRecovery
Selectthischoicetovieworchangesystemrecoverysettings.
•POSTWatchdogTimer
SelectthischoicetovieworenablethePOSTwatchdogtimer.
•POSTWatchdogTimerValue
SelectthischoicetovieworsetthePOSTloaderwatchdogtimervalue.
•RebootSystemonNMI
Selectthischoicetoenableordisablerestartingthesystemwheneveranonmaskableinterrupt
(NMI)occurs.Enableisthedefault.
•HaltonSevereError
SelectthischoicetoenableordisablethesystemfrombootingintoOS,displayingthePOST
eventviewerwheneverasevereerrorwasdetected.Disableisthedefault.
–Storage
Selectthischoicetovieworchangethestoragedevicesettings.
–Network
Selectthischoicetovieworchangethenetworkdeviceoptions,suchasiSCSI.
–DriveHealth
Selectthischoicetoviewthestatusofthecontrollersinstalledinthebladeserver.
•DateandTime
Chapter3.Configurationinformationandinstructions109