Table4.OperatorinformationpanelLEDs
LEDDescriptionAction
Systemlocator(blue)
UsethisLEDtovisuallylocatetheserver
amongotherservers.YoucanuseSystems
DirectororIMM2.1tolightthisLED
remotely.
Checklog(yellow)
Anerrorhasoccurredandcannotbe
isolatedwithoutperformingcertain
procedures.
1.ChecktheIMM2.1systemevent
logandthesystem-errorlogfor
informationabouttheerror.
2.Savethelogifnecessaryandclearthe
logafterwards.
System-error(yellow)
Anerrorhasoccurred.
1.CheckthelightpathdiagnosticsLEDs
andfollowtheinstructions.
2.ChecktheIMM2.1systemevent
logandthesystem-errorlogfor
informationabouttheerror.
3.Savethelogifnecessaryandclearthe
logafterwards.
Lightpathdiagnosticspanel
ThefollowingillustrationshowsthefrontLEDsonthelightpathdiagnosticspanel.Thelightpathdiagnostic
panelcanbeseenfromthefrontbezel.
Note:ThelightpathdiagnosticsLEDsremainlitonlywhiletheserverisconnectedtopower.
FormoreinformationabouttheLEDsonthelightpathdiagnosticspanel,see“Lightpathdiagnostics
LEDs”onpage133.
ThefollowingillustrationshowstheLEDsonthelightpathdiagnosticspanel.
Fan
Microprocessor
Temperature
Hard disk drive / RAID
Configuration
Memory
Power supply
Over spec
PCI
NMI
System board
Figure5.Lightpathdiagnosticspanel
Rearview
ThefollowingillustrationsshowtheconnectorsandLEDsontherearoftheserver.
18Systemx3500M5InstallationandServiceGuide