Attention:ToavoidbreakingtheretainingclipsordamagingtheDIMMconnectors,openand
closetheclipsgently.
DIMM
Alignment
slot
Retaining
clip
Alignment tab
Figure174.DIMMinstallation
Step6.Touchthestatic-protectivepackagethatcontainstheDIMMtoanyunpaintedmetalsurfaceonthe
outsideoftheserver.Then,removetheDIMMfromthepackage.
Step7.TurntheDIMMsothatthealignmentslotaligncorrectlywiththealignmenttab.
Step8.InserttheDIMMintotheconnectorbyaligningtheedgesoftheDIMMwiththeslotsattheends
oftheDIMMconnector(see“System-boardinternalconnectors”onpage25)forthelocations
oftheDIMMconnectors).
258Systemx3500M5InstallationandServiceGuide