Figure 96. M.2 WLAN module installation
Table 30. M.2 WLAN module installation
1 M.2 LTE module main cable (black cable, on the
top)
3 M.2 WLAN module main cable (blue cable)
2 M.2 LTE module AUX cable (gray cable, on the
bottom)
4 M.2 WLAN module AUX cable (white cable)
Step 8. Use screwdriver in the Misc kit to clockwise install the nut, the washer, and the M.2 WLAN module
cable on the rear of the server.
Note: Apply the same method to install both main and AUX cables.
Figure 97. M.2 WLAN module installation
Table 31. M.2 WLAN module installation
1 M.2 WLAN module cable 3 Nut
2 Washer
After you install the M.2 WLAN module, complete the following steps:
Chapter 3. Hardware replacement procedures 97
To Next Page
Loading...
