Function overview of the LH101 9
the LH101 may also join in the fun (p. 76).
Displaying feedback
information
This function of the LH101 manual control allows you to
display the status of the inputs of LR100/101 feedback
modules (p. 57).
Configuring decoder
settings
You can change the address, starting delay, and other
locomotive decoder features through programming. Two
methods are available:
Programming in
operational mode (PoM)
You can configure the settings of your locomotive decoder
while the locomotive is placed anywhere on the layout. For
example, drive your locomotive in front of a heavy freight
train and adjust the starting delay to the train! (p. 62).
Programming on the
programming track
The settings of your locomotive decoder are configured on
a separate programming track (p. 68).
The LH101 allows you to configure several system
settings. For example, you can configure the behaviour of
the emergency stop button, read out the software version
of your command station, and much more. (p. 88)
To Next Page
Loading...
