Mounted Type: CRNN -SR/ST
Art Cool Type: CRNN -SP/SV/SU
Appearance Functions (Button Descriptions)
No. Name Function
1 START/STOP
Operation starts when this button is pressed and
stops when the button is pressed again.
2
OPERATION MODE
SELECTION
Used to select the operation mode.
3
ROOM
TEMPERATURE
SETTING
Used to select the room temperature.
4
FAN SPEED
SELECTOR
Used to select fan speed in four steps (low,
medium, high, or CHAOS.)
5
JET COOL
(JET HEAT: CRNN-SP only)
Used to start or stop the speed cooling/heating.
(Speedcooling/heating operates super high fan
speed in cooling mode.)
6 CHAOS SWING
Used to stop or start louver movement and set
the desired up/down airflow direction.
7 ON/OFF TIMER
Used to set the time of starting and stopping
operation.
8 TIME SETTING
Used to adjust the time.
9 TIMER SET/CANCEL
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
10 SLEEP MODE AUTO
Used to set Sleep Mode Auto operation.
11 AIR CIRCULATION
Used to circulate the room air without cooling or
heating (turns indoor fan on/off).
12
ROOM
TEMPERATURE
CHECKING
Used to check the room temperature.
13 RESET
Used prior to resetting time or after replacing
batteries.
ON OFF
SET
CANCEL
Signal transmitter
10
11
6
1
3
12
13
7
8
9
5
4
2
To Next Page
Loading...
Need help?
General
