91
FUNCTION SETTING
ENGLISH
90
FUNCTION SETTING
Home Leave Set Temperature Setting
Home Leave Set Temperature function is used in Dual Setpoint Control mode.
When customer operate as home leave mode, this setting temperature value will be applied.
OK
NOTE
!
Home Leave Set Temperature function can only be used in a dual setpoint control mode.
Comfort cooling setting
It is the function to set the outdoor unit Comfort saving operation value.
• You can set the following values using [<,>(left/right)] button.
Value
Step 1
Step 2
Step 3
NOTE
!
The Comfort cooling function does not work in the group control.
Comfort cooling setting function is only available in some products.
To Next Page
