103
FUNCTION SETTING
ENGLISH
102
FUNCTION SETTING
Condition 1 Condition 2
Operation on
Off
Low
Periodic
Operation off
Off
Periodic
CO2 Fan Control(general ventilator)
A function that controls the fan when the product is turned ON/OFF, based on the CO2
concentration in the ventilation product.
1.
After selecting “CO2 fan control” in the Function settings list, press the [OK] button to go to the detail screen.
2. After selecting “Fan control during operation on” or “Fan control during operation off” in the
"CO2 Fan Control" list, you can set the following values using [<,>(left/right)] button.
OK
Economizer setting
Provides outside air to a room to save energy and improve the air quality indoors.
Value Description
Off Disable the economizer function to keep the outside air damper closed.
Auto
If the outside air temperature is lower than the air temperature indoors
when cooling is being operated, outside air is supplied to the room to save
energy.
Step 1
Opens the outside air damper opening by one stage to improve the indoor
air quality by introducing fresh air into the room.
Step 2
Opens the outside air damper opening by two stages to improve the indoor
air quality by introducing fresh air into the room.
NOTE
!
Economizer setting function may not be available on some products.
To Next Page
Loading...
