LG PREMTTB101 - Fan Continuous Operation Setting (Air Conditioner); Low Noise Mode Priority Setting (Air Conditioner; DX Ventilator)

177
INSTALLER SETTING
176
INSTALLER SETTING
ENGLISH
Fan continuous operation setting (air conditioner)
It is the function to set the indoor unit’s continued fan function usage. (It is the function to
maximize the cooling/heating efficiency by the outdoor unit operating the indoor unit fan
operation longer than the previous operation method.)
• You can set the following setting values using [<,>(left/right)] button.
Value Description
Clear Do not use continued fan usage
Set Use continued fan usage
Low Noise Mode Priority setting (air conditioner / DX ventilator)
It is the function to set the low noise mode control main agent. (It is the function to set that only
one of the outdoor unit / remote controller can control the low noise operation.)
• You can set the following setting values using [<,>(left/right)] button.
Value Description
RMC
Ignore the outdoor unit PCB’s low noise operation Switch Setting value
- Function setting – remote controller low noise operation time menu
deactivation
ODU(default)
It is controlled in the outdoor unit itself according to the outdoor unit
PCB’s low noise operation Switch Setting value
- Function setting – remote controller low noise operation time menu
deactivation