157
INSTALLER SETTING
156
INSTALLER SETTING
ENGLISH
Dry contact mode setting (air conditioner / general, DX
ventilator)
Dry contact function is the function that can be used only when the dry contact devices is
separately purchased and installed.
• Change setting values using [<,>(left/right)] button.
Value
Auto
manual
NOTE
!
For dry contact mode related detail functions, refer to the individual dry contact manual.
What is dry contact?
It means the contact point signal input when the hotel card key, human body detection
sensor, etc. are interfacing with the air conditioner.
Added system functionality by using external inputs (dry contacts and wet contacts).
Fixed air volume (air conditioner / DX ventilator)
It is the function to apply different fan speeds automatically for each thermal control status.
• You can set the following setting values using [<,>(left/right)] button.
Value Comp on Comp off
Variable Set fan speed Low
Fixed Set fan speed Set fan speed
To Next Page
Loading...
