LG PREMTTB101 - Zone Type Setting (Air Conditioner); Zone Number Setting (Air Conditioner); Over Heating (Air Conditioner)

159
INSTALLER SETTING
ENGLISH
158
INSTALLER SETTING
Over Heating (air conditioner)
Provides an adjustable deadband around the heating setpoint through selectable heating thermal
on/off values.
Value
Step0 : Default value
Step1 : 4°C / 6°C
Step2 : 2°C / 4°C
Step3 : -1°C / 1°C
Step4 : -0.5°C / 0.5°C
Zone Type Setting (air conditioner)
This function is only available on some products.
This function select a type of zone control type which indoor unit support as 'new type' or 'old
type'.
Zone Number Setting (air conditioner)
This function is only available on some products.
Zone Number is to set the number of installed zones. It's possible to control only in zone new
type.
Value
New(4 zone) : 2~4
New(8 zone) : 2~8
Value
Old
New(4 Zone)
New(8 Zone)