153
INSTALLER SETTING
152
INSTALLER SETTING
ENGLISH
Ceiling height setting (air conditioner)
It is the function to control the fan speed stage according to the ceiling height in the ceiling type
product.
• You can set the following setting values using [<,>(left/right)] button.
Ceiling height Description
Low Fan speed operates one step slower than the default value.
Standard Operates at the default fan speed
High
Fan speed operates one step faster than the default value.
Very high
Fan speed operates two steps faster than the default value.
NOTE
!
When group control is enabled some functions are limited depending on product type.
Static pressure setting(air conditioner)
Static pressure setting can be set only in the duct products. (It cannot be set in other products.)
• You can set the following setting values using [<,>(left/right)] button.
• 2TH function’s operation characteristics may be different for each product.
Static pressure
Description
Variable / Fixed ESP default value
Variable high static pressure V-H Variable High static pressure(High)
Fixed high static pressure
F-H Fixed High static pressure(High)
Variable low static pressure
V-L Variable Low static pressure(Low)
Fixed low static pressure
F-L Fixed Low static pressure(Low)
To Next Page
Loading...
Need help?
General
