167
INSTALLER SETTING
ENGLISH
166
INSTALLER SETTING
Guard timer(air conditioner)
It is a function that sets the minimum running time of outdoor unit cycle mode when switching
from cooling mode to heating mode and vice versa during Auto Operation mode.
Under the condition of cooling/heating switching, it switches between cooling and heating mode
after operation during the time scheduled in the Guard timer.
Step Value
0 0 minute
1 15 minutes
2 30 minutes
3 45 minutes
4 60 minutes
Over Cooling (air conditioner)
Provides an adjustable deadband around the cooling setpoint through selectable cooling thermal
on/off values.
Value
Step0 : 0.5°C / -0.5°C
Step1 : 6°C / 4°C
Step2 : 4°C / 2°C
Step3 : 1°C / -1°C
To Next Page
Loading...
Need help?
General
