179
INSTALLER SETTING
178
INSTALLER SETTING
ENGLISH
Human detection sensor (air conditioner)
It is the function to set whether to install human detection sensor and operation standard value.
• In the installer setting list, after selecting human detection sensor setting category, if you press
[OK] button, it moves to the detail screen.
• You can set the following setting values for each category using [<,> (left/right)] button.
Value Description
Installation status Not installed, basic installation, 90º rotation installation
Detection result sending cycle 5 s, 30 s, 1 min., 3 min.
Sensitivity setting Standard, low sensitivity, high sensitivity
Temperature control option
Step 0 : Keeps the product running and uses the
temperature power saving function.
Step 1 : The operation of indoor units is stopped by
using the temperature power saving function.
Detection Area Setting Indoor floor area detection, 6X6, 12X6
Humidity sensing position (air conditioner)
It is the function to set the location to detect humidity.
You can use [<, > (left/right)] button to set the following setting values.
Value Description
Remote controller (default value) Humidity sensor of the remote controller itself
Indoor unit Humidity received from indoor unit
To Next Page
Loading...
Need help?
General
