99
FUNCTION SETTING
98
FUNCTION SETTING
ENGLISH
Midnight air cooling (Ventilator)
It is the function to discharge indoor air and supply cool outdoor air into the indoor during
summer nights to save energy.
• In the function setting list, if you select midnight outdoor air cooling category and press [OK]
button, it moves to the detail screen.
- When you set the start and end time and press [OK] button, it saves and moves to the upper
level list.
NOTE
!
Whether to run the midnight air cooling is decided only when both air conditioner and
ventilation are stopped.
• Even if it is the set midnight air cooling time, it enters the midnight air cooling only when
the outdoor temperature conditions is met.
• During the midnight air cooling operation, “in midnight outdoor air cooling” message is
displayed on the monitoring screen.
• Midnight air cooling function may not work in some products.
OK
CAUTION
If you do not use the function, please set it as off.
!
Human detection mode setting
It is the function that enables energy saving through the human detection power saving operation
and wind direction setting.
In the function setting list, select human detection operation mode category and press [OK]
button to move to the lower level setting list.
OK
To Next Page
