Operation 4
Special equipment
¾ Move the actuating lever (1) on the steering
wheel upwards from the centre position.
The front windscreen wiper remains in inter-
mittent mode as long as the lever is actuated.
¾ Press the actuating lever (1) o
n the steering
wheel downwards from the centr
e position.
The front windscreen wiper is in intermittent
mode.
Switching on the rear window wiper
Truck in reverse travel:
¾ Switch toggle switch (2) an
d (3) to the zero
position.
¾ Move the actuating lever (1) on the steering
wheel upwards from the centre position.
The rear window wiper remains in intermittent
mode as long as the lever is actuated.
¾ Press the actuating leve
r (1) on the steering
wheel downwards from t
he centre position.
The rear window wiper is in intermittent mode.
Switching on the front windscreen wiper
and rear window wiper
¾ Move toggle switch (2) to centre position.
Truck at a standstil
lorinforwardstravel:
¾ Move the actuating lever (1) on the steering
wheel upwards from the centre position.
As long as the lever is actuated, the front
windscreen wiper remains in continuous
mode and the rear window wiper remains
in intermittent mode.
¾ Press the actuati
ng lever (1) on the steering
wheel downwards f
rom the centre position.
The front windscreen wiper is in continuous
mode and the rear window wiper is in intermit-
tent mode.
Truck in reverse travel:
Operating Instructions – 394 807 10 01 EN – 07/2011 75
To Next Page
Loading...
