6 CHAPTER 1: BASIC NOTIONS
MOVE S2
" " DECLARATION OF CONFORMITY
As per annex II A of directive 2006/42/EC
Manufacturer:
Technical file compiled by:
Description of the machine Automatic bar feeder
Type : MOVE S2
Serial number : (see number on official document)
The following transposed harmonized standards have been used :
EN ISO 12100:2010 : Safety of machinery – Basic concepts & principles,
ISO/TR 14121-2:2013 : Safety of machinery – Risk assessment,
EN ISO 13857:2008 : Safety of machinery – Safety distances to prevent hazard
zones being reached by upper and lower limbs,
ISO 14120:2002 : Safety of machinery – Conception of movable guards,
EN ISO 13850:2006 : Safety of machinery – Emergency stop equipment,
EN ISO 13849-1:2008 : Safety of machinery – Safety-related parts of control systems,
ISO 14118:2000 : Safety of machinery – Prevention of unexpected start-up,
EN 60204-1:2006+A1:2009:Safety of machinery – Electrical equipment of machines,
EN ISO 14119:2013 : Safety of machinery – Interlocking devices,
EN ISO 4414:2010 : Pneumatic Power – Rules and Safety requirements,
CEI 60812:2006 : Safety of machinery – FMECA Analysis
EN 61439-1:2011, EN 61439-2:2011, EN 61439-3:2012
: Low-voltage switchgear and control gear assemblies
EN 61000-6-4 : Generic emissions standard, Industrial environment,
EN 61000-6-2 : Generic immunity standard, Industrial environment
Location and date: Stamp and signature:
Manager Export Department
To Next Page
Loading...
