Loadrite PRO - Name Speed Dial and Scrolling

LOADRITE PRO OPERATING MANUAL
26
You may have up to five data fields available, depending on how the
Loadrite has been set up at installation time.
Alphanumeric Data
The Loadrite has an option to enter Alphanumeric (Alpha) data. This option
is enabled at installation time. The Loadrite uses its telephone style keypad
to allow letters to be entered.
When a number key is pressed, a digit is displayed. If the same number key
is pressed again, the first letter on that key is displayed. If the key is
pressed again the second letter is displayed and so on. For example, if the
A B C
key is pressed repeatedly, the characters displayed in sequence are
‘2’, ‘A’, ‘B’, ‘C’, ‘a’, ‘b’, ‘c’, ‘2’, ‘A’ and so on.
In this way names can be entered for customers, trucks etc.
Sometimes a name will have two sequential letters on the same key. For
example the letters ‘D’ and ‘E’ in the word ‘DEAKON. After the ‘D’ has been
entered (by pressing the
+
L
D E F
key twice), wait a second or two. The cursor
will automatically shift and be ready for your next character. You can then
enter 'E' by pressing the
+
L
D E F
key again.
Name Speed Dial and Scrolling
The Loadrite keeps a list of names for the data fields i.e. Customer List.
You can either use 5 6 keys to scroll through the list, or dial the index to
the list to recall the name.
Suppose we have a customer list as follows:
Joe
Deakon
Smith
Johnson
Adams
Use scrolling to recall Smith:
• Press
• Press
56
until you see Smith on the screen, then press