LOADRITE PRO OPERATING MANUAL
27
Use speed dial to recall Smith:
• Press
• You can press
+
L
D E F
(the 3
rd
name on the list), then
The data list can be printed out via Print Function: Print Data List as
described on page 68.
Name speed dial requires the Data Index option to be enabled at
installation.
Data List (name list) will not store names starting with numbers, if name
speed dial function is in active (Data Index option is enabled).
Auto target value look up
This function enables you to store a list of target values (for different trucks).
You can recall the target value from memory by either entering a number or
scrolling through a list of truck names.
Use scrolling to recall truck target value:
Suppose we have a truck and target list as follows. We configure Data 3 to
store truck plate numbers and Data 4 to store the corresponding target
values. Data 3 itself is an alphanumeric field and is set up as target
reference. Data 4 is set up as target list.
Data 3: Truck Data 4: Target
AGT175 15000
AUQ887 16500
BQ1001 15500
BQ1002 15500
YA8855 12000
To Next Page
Loading...
