Loadrite PRO - Auto tare value look up; Auto-increment

LOADRITE PRO OPERATING MANUAL
29
Suppose we want to recall the target value for Truck AUQ887. This truck is
the second item on the list. It makes it Truck #2.
In Ready mode,
press . You will be prompted for the
first data field (Data 1: Customer). Since
we use Data 4 for Target list, you must first
enter data for Data 1, Data 2, and Data 3.
Customer
Smith
When you get to Data 4 (Target), the last
target value and the last index number will
be displayed.
Target
12000
Target
Index
5
Enter the index (2 for this example, as
Truck AUQ887 is Truck #2), and then
press .
Target
Index
2
Loadrite will use the index 2 and look up
the corresponding target value.
Target
16500
You will then return to the To Load
screen.
To Load
Sand
16500