LOADRITE PRO OPERATING MANUAL
54
Stock Pile Tip-off
Using this method, you dump product from the bucket until it contains the
right amount for loading onto the truck. The following example illustrates
the weigh screen shots when in Total Mode or Target Mode.
EXAMPLE TOTAL MODE TARGET MODE
Target weight = 6000kg
Current weight = 5600kg
Weight needed = 400kg
Ready
Sand
5600
To Load
Sand
400
Lift the load in the normal way.
The Loadrite displays the lifted
weight (2200kg)
Lift the bucket to a suitable
height over the truck.
Sand
5600
2200
Sand
400
2200
Press . The Tip-Off
indicator light comes on.
Tip Off
Wait...
2200
Tip Off
Wait...
2200
To adjust weight of last
bucket to 400kg:
Middle number shows total
weight.
Lower number shows ‘live’
weight in the bucket.
Middle number shows target
weight.
Lower number shows ‘live’
weight in the bucket.
Sand
5600
2200
Sand
400
2200
To Next Page
Loading...
