2
INSTALLING THE QLR460 SERIES PCI CARD
Before You Start
Prerequisites & Hardware Requirements
Ensure that your system meets the following requirements before you begin installation.
Prerequisites
The system must have:
• A free PCI slot
• A standard PCI opening at the back of the system. Micro form factor cases may not be able to
accomdate the QLR460 series
Minimum System Requirements
• Intel Pentium 4 or higher processor
• Windows XP, Vista, 7 (32-bit versions)
• Optical Drive
• 250GB SATA hard drive
• Separate video card with 64MB of memory
• 800 x 600 VGA color display or better
• Broadband connection required for remote management
• Ground yourself properly before performing hardware
upgrades. Improper grounding damages electronic
components in your system
• It is recommended to work over a non-carpeted area to
prevent static electricity build-up
• Work on a level surface
To Next Page
Loading...
Need help?
General