35
Vista Pro 6 Server: Viewing Mode
CONFIGURING E-MAIL NOTIFICATION
The QLR460 series is capable of sending e-mail notifications if the system detects a motion event.
Your system must be connected to the internet before it can send out e-mails.
Prerequisites:
Before you can use E-mail Notification, you must set up a DDNS account, and enter the DDNS
information into your system. For details,
see “Configuring DDNS Settings” on page 34.
To configure E-Mail notification settings:
1. Click the Setup ( )button and then click the Network tab. The Network tab opens.
2. Under Network Config, click the E-Mail Set button. The E-mail configuration window opens.
3. Under Select Camera, click the camera you wish to apply the settings to. You can configure
individual cameras you want to receive notifications if an event occurs. Click the All button to
apply the settings to all cameras.
4. Under E-mail Notification, select the Use checkbox.
E-mail test button
Figure 8.6 E-Mail notification configuration window.
2. Select the Use
checkbox
3. Click Schedule
button , then drag
cursor in date grid
1. Select Camera
4. Fill in e-mail address of where to
send notification
To Next Page
Loading...
Need help?
General