215585 58 Revision A
$
&
%
'
((
))
Figure 3.120: SMV Sign
3. Retrieve bracket (A).
4. Attach bracket (A) to left end float spring member with
M12 bolts (B) and nuts retrieved from the shipping bag.
5. Attach sign (C) to bracket (A) and secure with two bolts (D),
washers (E), and nuts (F).
6. Torque nuts (F) to 20 Nm (14.75 lbf·ft). Do NOT
overtighten.
$
%
&
'
Figure 3.121: SMV Decals
7. Remove decal bag (B) taped to SMV bracket (A).
8. Choose appropriate speed decal (C) or (D) depending on
region. Orient decal as shown when installing it on the SMV
bracket.
ASSEMBLING THE ROTARY DISC PULL-TYPE – WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT
To Next Page
Loading...
