Maeda MC815C - Page 9

0-7
Item
Page
DISASSEMBLING AND ASSEMBLING
7-1
1. DISMOUNTING AND MOUNTING THE BOOM ASSEMBLY 7-2
1.1 DISMOUNTING THE BOOM 7-3
1.2 MOUNTING THE BOOM 7-3
1.3 CONNECTION DIAGRAM FOR BOOM EQUIPMENT 7-3
2. DISASSEMBLING AND ASSEMBLING THE BOOM ASSEMBLY 7-4
2.1 DISASSEMBLING THE NO.1 BOOM 7-4
2.2 DISASSEMBLING THE NO.2 BOOM 7-5
2.3 DISASSEMBLING THE NO.3 BOOM 7-6
2.4 DISASSEMBLING THE NO.4 BOOM 7-7
2.5 DISASSEMBLING THE TELESCOPIC CYLINDER FROM THE NO. 5 BOOM 7-8
3. DISMOUNTING AND MOUNTING THE WINCH WIRE ROPE 7-9
3.1 REMOVAL OF WINCH WIRE ROPE 7-9
3.2 INSTALLATION OF WINCH WIRE ROPE 7-10
3.3 ACTIONS TO TAKE WHEN THE WINCH WIRE ROPE IS TWISTED 7-12
4. CHECKING/ADJUSTING MAIN BOOM TELESCOPING WIRE ROPE 7-13
4.1 CHECKING THE BOOM TELESCOPING WIRE ROPE 7-13
4.2 ADJUSTING THE BOOM TELESCOPING WIRE ROPE 7-14
REFERENCE VALUES
8-1
1. TABLE OF ENGINE RELATED REFERENCE VALUES 8-2
2. TABLE OF MACHINE RELATED REFERENCE VALUES 8-3
3. TABLE OF MOMENT LIMITER RELATED REFERENCE VALUES 8-6
SERVICE MODE
S-1
1. MONITORING S-3
2. CONSUMABLES S-4
3. WORK HISTORY S-5
4. ERROR HISTORY S-9
5. INITIAL SETTING S-9
6. CRANE CALIBRATION S-11
7. ML SETTING S-17
8. FUNCTION S-18
TROUBLESHOOTING
T-1
1. TROUBLESHOOTING T-301
1.1 TROUBLESHOOTING (RELATED TO ELECTRIC; LIST OF ERROR CODES) T-301
1.2 TROUBLESHOOTING (MATTERS OTHER THAN ERROR CODE DISPLAY) T-401
1.2.1 TROUBLESHOOTING OF THE ENGINE UNIT T-403
1.2.2 TROUBLESHOOTING OF THE ELECTRICAL SYSTEMS T-409
1.2.3 TROUBLESHOOTING OF THE HYDRAULIC PRESSURE AND MECHANICAL SYSTEMS T-417