This table is an alphabetical list and brief description of the Auxiliary
Functions. lt is not intended to replace the descriptions earlier in this
chapters, but only to provide a quick reference.
AUXILIARY
2
5-3
Controls the brightness of the
unit's display.
Erase
Waypoints
10
5-13
Deletes all waypoints and
routes from the unit's memory.
NMEA Setup
6
5-9
Selects output message
format to supported NMEA
devices.
Receiver
Status
Screen
1
5-2
Displays five satellites that are
in view and monitors the
search, acquisition, and
ranging of those satellites.
5-16
CODE
(AUX +)
PAGE
DESCRIPTION FUNCTION
Battery
9
5-12
Switches the unit between
Saver
Battery Saver and continuous
operation when the unit is
being run from battery power.
Beeper
7
5-10
Turns the beeper on and off.
Control
Clear Memory
13
5-14
Erases all stored information
in
the unit's memory.
Display
Control
To Next Page
Loading...
