Mahr Millimar C 1202 User Manual

70
Mahr GmbH • Millimar C1202
the ▼ or ▲ key to enter the relevant
value.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
– Use
▼
to select the value for
Calibration max and enter the
relevant value as explained above.
– To balance, use the ▼ key to select
Perform customer calibration.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
The display shows information on
how to position the probe at C1.
– Use the 4 key to conrm or Ó to
cancel the process.
Progress of the measurement is
indicated by a green progress bar.

Mahr Millimar C 1202 Specifications

General

Brand	Mahr
Model	Millimar C 1202
Category	Measuring Instruments
Language	English