Manitowoc Grove GMK 4100L-1 - Page 65

Maintenance overview
5.2 Maintenance plans
25.11.2016
Maintenance manual 3 302 364 en 5 - 17
GMK 4100L-1
5.2.9 Maintenance plan Y 5
5.2.10 Maintenance plan Y 6
Y 5
Maintenance work on the CARRIER:
every 60 months/100,000 km (62,000 mi)
– Have the Cardan shaft between the transmission on the engine and the
transfer case replaced by
Manitowoc Crane Care or an authorised GROVE
dealer.
Transmission
– Changing the oil
à p. 7 - 42
Maintenance work on the SUPERSTRUCTURE:
every 60 months/after 5,000 oper. hrs.
– Have both the Cardan shafts on the angle gear replaced by
Manitowoc Crane Care or an authorised GROVE dealer.
Cable drums and slewing angle sensor
– Lubricating the slewing angle sensor
à p. 8 - 67
Y 6
Maintenance work on the CARRIER:
every 72 months
No maintenance work in this period.
The long-term intervals always include the short-term intervals.
Maintenance work on the SUPERSTRUCTURE:
every 72 months/after 6,000 oper. hrs.
Hoists
– Having a general inspection carried out
à p. 8 - 13