Manitowoc Grove GMK6300L-1

Maintenance work on the superstructure
8.9 Hydraulic system
13.02.2018
Maintenance manual 3 302 719 en 8 - 75
GMK6300L-1
Changing oil
filter 2
• Release the receptacle (1) at the hexagon.
• Change the filter (2).
• Replace the gaskets.
• Fill the receptacle with clean oil and tighten
it – torque 25 Nm (18.5 lbf ft).
Changing oil
filter 3
• Release the receptacle (1) at the hexagon.
• Change the filter (2).
• Replace the gaskets.
• Fill the receptacle with clean oil and tighten
it – torque 60 Nm (44 lbf ft).
s