Maintenance overview
5.2 Maintenance plans
13.02.2018
Maintenance manual 3 302 719 en 5 - 3
GMK6300L-1
5.2 Maintenance plans
The descriptions for certain maintenance work for the maintenance plans D,
W, M 1 to M 12 and Y 2 to Y 10 are provided for
– the carrier in Kapitel 7 and for
– the superstructure in Kapitel 8.
References (chapter and page number) to the description of this mainte-
nance work
ca
n be found after the respective maintenance work for carrier
and superstructure.
The section titles
– of Kapitel 7 Maintenance work on the carrier and
– of Kapitel 8
Maintenance work on the superstructure
contain the symbol (D to Y 10) of th
e relevant maintenance plan for better
comprehension.
In addition to the Maintenance work on the carrier and the Maintenance
work on the superstructure Kapitel 6 also lists the Lubricants and
consumables:
– The designations of the oils/lubricants in accordance with Lubricants list,
p. 6 - 2.
– The amounts as
approximate values for oil amounts in litres (ltr) (and US
gallons (gal)) (the exact oil amounts can always be determined by the
oil level inspection holes, the oil dipsticks or the oil level indicators)
Lubricant applications list, p. 6 - 3.
H
Items that are only available with additional equipment are designated
accordingly in Kapitel 7 and Kapitel 8.
Maintenance work on the engines over and above the daily and weekly
checks
is only partially described in this maintenance manual. When
carrying out such maintenance work, follow the instructions given
in the
Engine manufacturer’s documentation.
To Next Page
Loading...
