EasyManuals Logo

Manitowoc Grove TMS800E User Manual

Manitowoc Grove TMS800E
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #370 background imageLoading...
Page #370 background image
9-12
Published 01-29-2014, Control # 496-00
LUBRICATION TMS800E SERVICE MANUAL
42. Lower Boom Nose Sheaves
Lube Type - EP-MPG
Lube Interval - 250 hours or 3 months, whichever occurs
first
Lube Amount - Until grease extrudes
Application - 4 grease fittings per sheave
43. Jib Sheaves
Lube Type - EP-MPG
Lube Interval - 250 hours or 3 months, whichever occurs
first
Lube Amount - Until grease extrudes
Application - 2 grease fittings
44. Jib Mast Sheave
Lube Type - EP-MPG
Lube Interval - 500 hours or 12 months, whichever
occurs first
Lube Amount - Until grease extrudes
Application - 1 grease fitting
45. Auxiliary Boom Nose Sheave
Lube Type - EP-MPG
Lube Interval - 250 hours or 3 months, whichever
interval occurs first
Lube Amount - Until grease extrudes
Application - 1 grease fitting
46. Hook Block Swivel Bearing
Lube Type - EP-MPG
Lube Interval - 250 hours or 3 months, whichever
interval occurs first
Lube Amount - Until grease extrudes
Application - 1 grease fitting
47. Hook Block Sheaves
Lube Type - EP-MPG
Lube Interval - 250 hours or 3 months, whichever
interval occurs first
Lube Amount - Until grease extrudes
Application - 1 grease fitting per sheave
(4 fittings total - 75 ton)
48. Overhaul Ball Swivel Top
Lube Type - EP-MPG
Lube Interval - 250 hours or 3 months, whichever
interval occurs first
Lube Amount - Until grease extrudes
Application - 1 grease fitting
49. Turntable Swivel Lock Pin
Lube Type - OGL
Lube Interval - 500 hours or 6 months, whichever
interval occurs first
Lube Amount - Coat points requiring periodic lubrication
Application - Spray on
WIRE ROPE LUBRICATION
Wire rope is lubricated during manufacturing so that the
strands, and individual wires in strands, may move as the
rope moves and bends. A wire rope cannot be lubricated
sufficiently during manufacture to last its entire life.
Therefore, new lubricant must be added periodically
throughout the life of a rope to replace factory lubricant which
is used or lost.
NOTE: Wire rope may be purchased by contacting the
Manitowoc Crane Care Parts Department.
For more detailed information concerning the lubrication and
inspection of wire rope, refer to Wire Rope, page 1-17.
Reference Only

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Grove TMS800E and is the answer not in the manual?

Manitowoc Grove TMS800E Specifications

General IconGeneral
BrandManitowoc
ModelGrove TMS800E
CategoryConstruction Equipment
LanguageEnglish

Related product manuals