FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
6. Select whether to preview the last scan ("Start") or not ("-").
By selecting "Start", the same barcode can be marked
several times without having to be scanned again.
7. Press Enter.
8. Highlight YES/NO
YES
When YES is chosen, the text entered through the keyboard is marked right after confirmation
with the Enter key.
NO
When NO is chosen, the text entered through the keyboard is first saved as a variable:
Read keyboard 1 = %$M20 (content: 80 characters)
Read keyboard 2 = %$M21 (content: 80 characters)
Read keyboard 3 = %$M22 (content: 80 characters)
Read keyboard 23 = %$M23 (content: 250 characters)
The function „Read keyboard 23“ can be used for scanning
a QR code with more than 80 characters
The variable can be written into the marking line at a later time.
Sample application:
Using a barcode scanner
9. Press the ESC key.
The main menu appears.
The Read keyboard substitute has been inserted.
To Next Page
Loading...
