marposs TESTAR E4N - INSTALLATION AND USE; MECHANICAL INSTALLATION; CONNECTION OF A COLUMN TO THE MAINS POWER SUPPLY

8
2
A
C
B
2.1
2.2
A
B
B
CONNECTION OF A COLUMN TO THE MAINS POWER SUPPLY
The E4N can be used with a mains power supply in the range 85 to 265 V a.c. (50/60 Hz).
Plug the power supply cable (B) into the socket (A) on the rear of the column.
Power up the E4N at the switch (C).

INSTALLATION AND USE
E4N columns can be mounted singly or in groups of up to 5 units on a stand (for identification

A : Stand.
B : Extension pins.
MECHANICAL INSTALLATION