This product complies with following European and U.S. standards:
EN61010-1 (SAFETY)
EN61326-1 (EMC)
47CFR Subpart C
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communica-
tions.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Manual code: D2040036U1
Edition: 10/2009
MARPOSS S.p.A. does not take on the obligation of notifyng possible further changes to the product.
The descriptions reported in this book not authorize any tampering by non-authorized personnel.
The warranty on the equipments will decay if such tamperings are found.
© Copyright Marposs S.p.A. 2009
To Next Page
Loading...
Need help?
General
