Chapter 3 Engine Section 3 Engine dissassembly
3—12
Remove starting motor
As in Fig.3.3.16
Remove the oil filter.
As in Fig.3.3.17
Remove the clutch cover①..
As in Fig.3.3.18
Clamp the magneto rotor fixing bolts. Remove the
clutch spring plate assembly bolt diagonally and then
remove the clutch spring and clutch spring plate.
As in Fig.3.3.19
Remove the active friction plate and driven plate from
the clutch.
As in Fig.3.3.20
Fig.3.3.16
Fig.3.3.17
Fig.3.3.18
Fig.3.3.19
Fig.3.3.20
To Next Page
Loading...
