Wintest - Issue 5.a
GUF511.6
AUTOTRONIC 5 - PowerShuttle - Programming and setting
parameters
Selecting a calculator to be programmed
Double click in the left-hand column of the line of the
calculator you wish to program.
The line turns blue and at the base of the left-hand
column, Wintest specifies which Autotronic 5 has
been selected.
Selecting a soft to integrate into the calcu-
lator
Click on the button of the required soft.
The line under the buttons specifies which soft has
been selected.
Starting programming
Click on the “Programming” button
A gauge indicates the progression of the program-
ming.
At the end of the programming, Wintest automatically
starts a scanning of CAN network.
To Next Page
Loading...
