WINTEST - Issue 5.a
GUF513.12
AUTOTRONIC 5 - PowerShuttle - Error codes
CAB18: Bottom-of-Clutch (BOC) pedal
switch
Description
Location: on the clutch pedal support (Fig. 6)
2 switches: NO et NC.
- Connectors 1: Signal
- Connectors 2: Power supply
- Connectors 3: Signal
Assembly:
- Tighten the locknut to approximately 8 Nm
Possible error codes
MA-11-01269A
CAB17
56
CAB18
Fig. 6
123
1
2
3
MA-11-01270A
Fig. 7
Errors Description
Reaction of the
System
Solutions
Resetting the system
after clearing error
217
Open circuit or short circuit at
0V
PowerShuttle
locked
Check:
- Contacts
- Harness connections
- Wiring
- F12 and F23 fuses
Press the clutch pedal to
contact the BOC
218 Short circuit at +12V
Clutch fills with
ramp by default
To Next Page
Loading...
