WINTEST - Issue 5.a
GUF513.16
AUTOTRONIC 5 - PowerShuttle - Error codes
TR24: Oil transmission temperature sensor
Description
Location: on the gearbox cover (Fig. 14)
Resistant sensor.
- Connectors 1: Ground
- Connectors 2: Signal
Signals:
Assembly:
- Apply a small amount of Loctite 542 to the thread
- Tighten to a torque of approximately 30 Nm
Possible error codes
Temperature
in °C
Resistance in ohms
0 10.7 K (+/- 1.3)
20 4000
50 500
TR16TR24
TR25
MA-11-01264A
Fig. 14
T˚
analog.
1
2
1
2
MA-11-01226A
Fig. 15
Errors Description Solutions
Resetting the system
after clearing error
212 Transmission temperature
over 100°C
There are 2 possibilities:
- Temperature is too high
• Stop tractor movement, auxiliary spool
valve and PTO operation to allow the trans-
mission to cool
• Ensure that the oil level is correct
- the sensor is faulty and displays incorrect
data. It must therefore be checked.
Press the clutch pedal to
contact the BOC
To Next Page
Loading...
