Wintest - Issue 5.a
GUF514.6
AUTOTRONIC 5 - Power Shuttle - Calibration and adjustments
B . Adjusting the Power Shuttle
progressive shifting
Once the calibration has been correctly carried out, it is
possible to adjust the calibration parameters to obtain
faster or slower Power Shuttle reactions if the accept-
able criteria have not been met.
This procedure can be carried out from soft version
01.03.
After a new calibration, the adjustment procedures of
each direction of travel are reinitialised.
N
OTE : During the procedure, if the pedal is pressed
down or the ignition key switched off, the modifica-
tions are not stored.
To Next Page
Loading...
